Listening To The Radio
1.) Press the POWER ON/OFF button on the top panel. The display will change from time to radio frequency. The first time you turn your unit on the display will show FM 87.5 MHz.
2.) To switch between the FM and AM bands press the AM/FM button. The first time you select the AM band the display will show AM 520 KHz.
3.) Tune to the desired station with the | or | buttons on the top panel as |
follows: |
|
|
•Manual Tuning
Repeatedly press either the 
or 
button until the display shows the frequency of the desired station.
•Automatic Tuning
Depress and hold either the 
or 
button until the display begins to move, then release the button. The tuner searches down or up the band until it finds a strong signal and then stops on that station. Repeat this process until the tuner stops on the desired station.
4.) If you tuned to an FM Stereo station the FM ST indicator appears in the display.
5.) Five seconds after you release the 
or 
button the display automatically changes from radio frequency back to the correct time.
To see the station frequency again, press the TIME button. The display will change from time to radio frequency for 5 seconds and then return to the correct time
6.) Adjust the VOLUME control on the right side of the cabinet to the desired level.
7.) When you are finished listening press the POWER ON/OFF button to shut the power ‘Off’.
Note: The Tuner remembers the last station that was tuned before the power is switched off and automatically returns to that station when the power is switched on again.
1 6
CKD5811_080306.p65 | 16 |
3/8/2006, 11:01