NAP Timer (Buzzer Alarm Only)
The Nap timer function will wake you to the buzzer alarm after a nap of up to 99 minutes without the need to change your regular Alarm 1 or Alarm 2 settings.
1.) If the system is playing, shut the power ‘Off’.
2.) Press the NAP button on the top panel.
The display will briefly show “n:30” and the
NAP indicator appears.
After 30 minutes the crescendo buzzer alarm will turn on to wake you up.
3.) To change the amount of naptime depress and hold the NAP button and press
the 
or 
buttons to decrease or increase the amount of naptime from 2 minutes to 99 minutes.
Note: When you change the Nap timer from the original
For example if you change the Nap timer setting from 30 minutes to 45 minutes, 45 minutes becomes the new default Nap timer setting until you change it again.
• To cancel Nap Timer, press the SNOOZE button.
DIMMER Control
The display dimmer control was set to the HI (High) position at our factory.
If you find the display to be too bright for sleeping, slide the DIMMER switch to the LO (Low) position.
PHONES (Stereo Headphone) Jack
This system includes a stereo headphone jack for private listening without disturbing others. The headphone jack is located on the right side of the cabinet. The built in speakers automatically shut off when headphones are connected to the headphone jack.
Important: Before connecting your headphones, set the VOLUME control to a low level. Then connect your headphones, put them on and gradually increase the volume to a comfortable listening level. Remember that CDs can often contain very loud passages as well as softer passages. It is a good idea to adjust the listening level during a louder passage so that you are not surprised by a sudden, uncomfortable increase in the headphone sound.
3 1
CKD5811_080306.p65 | 31 |
3/8/2006, 11:01