Emerson CKD8300 owner manual Preparation for USE, Unpacking and SET UP, Power Source

Page 5
AC Plug
AC Outlet

PREPARATION FOR USE

UNPACKING AND SET UP

•Remove the radio from the carton and remove all packing material from the radio. We suggest that you save the packing material, if possible, in the unlikely event that your radio ever needs to be returned for service. The original carton and packing material is the only safe way to pack your radio to protect it from damage in transit.

•Remove the CD protective card on the CD mechanism and any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet.

•Note the serial number on the bottom of your radio and write this number in the space provided on Page 2 of this manual.

•Place your radio on a level surface such as a table, desk or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration.

•Unwind the AC power cord and extend it to its full length. Unwind the FM lead wire antenna and extend it to its full length.

POWER SOURCE

This radio is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the radio on any other power source. You could cause damage to the radio that is not covered by your warranty.

This radio should be connected to an AC outlet that is always ‘live’. Do not connect it to an outlet that is controlled by a wall switch. When the power to the radio is interrupted, the built in lithium battery takes over to maintain the time and alarm settings. To maximize the life of the lithium battery keep the radio connected to a ‘live’AC outlet at all times.

You will note that this system is equipped with a polarized AC power plug having one blade wider than the other. This is a safety feature. If this plug does not fit into your existing AC outlet, do not try to

defeat this safety feature by filing the wide blade to make it fit into your outlet. If this plug will not fit into your

outlet, you probably have an out-

dated non-polarized AC outlet. You should have your outlet changed by

a qualified licensed electrician.

4

CKD8300_ib071403.p65

4

14/7/2003, 15:08

Page 4 Page 6
Image 5
Page 4 Page 6
Contents CD Clock Radio Important Safety Instructions Model No CKD8300 Serial Number FCC Information Important NotesClass 1 Laser Product Preparation for USE Unpacking and SET UPPower Source Protect Your Furniture Program /TIME Zone Button Location of Controls and IndicatorsOperating Instructions Setting the TIME, the First TimeYear Display Date DisplayDAY Display Manual Time Adjustments Daylight Saving and Leap Year AdjustmentsAdjusting the Wake UP Times Wake Up Option Display Indication Selecting the Alarm ModeListening to the Radio Checking the Wake UP TimesPause Control Playing Compact DiscsRandom Playback SKIP/SEARCH ControlsRepeat Playback Programmed Playback Wake to the CD Player Alarm OperationWake to the Buzzer Wake to the RadioStereo Headphone Jack Snooze AlarmSleep to Music Timer Bottom Cabinet Changing the Lithium BatteryBe Careful not to Lose the Small Screw Resetting the Clock After a Total Memory Loss Lithium Battery Precautions Compact Disc Care Care and MaintenanceCare of the Cabinet Limited Warranty Emerson
Top Page Image Contents