Emerson CK5052 owner manual To Install the Battery, Power Source

Page 6

TO INSTALL THE BATTERY

• Open the battery compartment cover on the bottom of the radio by pressing the tab in the direction of the arrow.

Press

• Connect the 9-volt battery to the battery terminal. It can only be connected one way.

•Push the battery into the battery compartment and replace the cover.

9 VOLT

POWER FAILURE INDICATOR

If no battery is installed in the radio, or if the battery in the compartment is weak or dead, the time and alarm settings will be lost if the power is interrupted. When the power is restored the clock display will begin flashing. This is your indication that the time display is incorrect and needs to be reset.

Important:

After you reset the time, be sure to reset your alarm settings as well.

POWER SOURCE

This radio is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the radio on any other power source. You could cause damage to the radio that is not covered by your warranty.

This radio should be connected to an AC outlet that is always ‘live’. Do not connect it to an outlet that is controlled by a wall switch. When the power to the radio is interrupted, the Sure Alarm battery back up system takes over to maintain the time and alarm settings. To maximize the life of the back up battery, keep the radio connected to a ‘live’AC outlet at all times.

This radio uses a polarized AC plug which has one blade wider than the other. This plug will only fit into a polarized AC outlet. This is a safety feature. If the plug will not fit, you may have an older non-polarized AC outlet. Do not defeat the safety feature by trying to file the wider blade, or replacing the plug. Contact an electrician to replace your outdated outlet.

AC Outlet

AC Plug

5

CK5052_ib041503.p65

5

15/4/2003, 10:30

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CK5052 Important Safetynstructions Model CK5052 Serial Number Important Notes FCC InformationUnpacking and SET UP SURE-ALARM Battery Back UP SystemPreparation for USE To Install the Battery Power SourceLocation of Controls and Indicators Setting the Clock Operating InstructionsSetting the Wake UP Times Checking the Wake UP TimesListening to the Radio Antenna InformationWake to Radio Wake to BuzzerSnooze Alarm Radio and Buzzer OperationNAP Timer To set the Nap TimerSleep to Music Timer Dimmer ControlCare and Maintenance Limited Warranty Emerson Radio Corp

CK5052 specifications

The Emerson CK5052 is an advanced industrial control unit designed for automation and monitoring applications across various sectors. With its robust architecture and versatile functionalities, it stands out as a reliable solution for managing complex processes in manufacturing, energy, and utility industries.

One of the most notable features of the CK5052 is its high-performance processing capability. Equipped with a powerful microprocessor, the unit processes data swiftly and efficiently, enabling real-time monitoring and control. This ensures that operators can react promptly to any irregularities in processes, significantly enhancing operational efficiency.

The CK5052 supports multiple communication protocols, which makes it highly adaptable to different system architectures. With compatibility for popular protocols like Modbus, Profibus, and Ethernet/IP, this control unit can easily integrate into existing infrastructure, allowing for seamless data exchange between devices. This interoperability is crucial in modern industrial settings, where diverse components must work together cohesively.

In terms of user interface, the Emerson CK5052 boasts a clear and intuitive display, allowing operators to navigate through settings and parameters with ease. The user-friendly design minimizes training time and allows for quick adjustments, which is essential in fast-paced environments. Additionally, the unit supports remote access capabilities, permitting users to monitor and control operations from virtually anywhere.

The CK5052 is engineered for reliability and durability, featuring rugged construction that can withstand harsh working conditions. Its design includes protections against electrical surges and environmental factors, ensuring long-term stability in various applications. This resilience reduces downtime and maintenance costs, making it a cost-effective solution over time.

Another key aspect of the CK5052 is its advanced data logging and analysis features. It can store valuable historical data, enabling operators to analyze trends and optimize processes. By utilizing this data, companies can enhance their operational strategies, leading to improved productivity and reduced waste.

Overall, the Emerson CK5052 represents a significant advancement in industrial control technology, combining powerful processing, flexible communication, user-friendly features, and robust durability. Its comprehensive capabilities make it an ideal choice for industries looking to enhance automation and optimize process management. As manufacturing and industrial automation continue to evolve, the CK5052 stands ready to meet the challenges of modern operations while providing reliability and innovative solutions.
Top Page Image Contents