Fujitsu BX600 S2 manual Installing a LAN Switch Blade, Vcaution

Ethernet Switch Blades Installing a LAN Switch Blade

Configuration with a Combination of 2-way and 4-way Server Blades

The following figure illustrates the assignment of the switch blades to the LAN ports of the server blades in a configuration with two 4-way server blades and six 2-way server blades.

Switch blade 1 Switch blade 2

A B A B A B A B A B A B A B A B A B A B

5	6	4-way	4-way	1	2	3	4
blade	blade			blade	blade	blade	blade
		server	server
2-way server	2-way server	blade 1	blade 2	2-way server	2-way server	2-way server	2-way server

Figure 47: LAN port assignment with 4-way and 2-way server blades

8.6Installing a LAN Switch Blade

Depending on the desired configuration, the system can be upgraded with one additional switch blade.

VCAUTION!

● Read the safety information and the information on handling electro- static-sensitive components in the section “Components With Electrostatic-Sensitive Devices” on page 25.

● LAN switch blades must always be installed in slots NET1 and NET3 first (see page 90).

PRIMERGY BX600 S2 Basic Unit 93