Fujitsu BX600 S2 manual FC Port Assignment, Configuration with Five 4-way Server Blades

FC Port Assignment FC Pass-Thru Blade

Configuration with Five 4-way Server Blades

Because a 4-way server blade occupies two slots in the blade server chassis, there are four connections for four Fibre Channel ports available for a 4-way server blade. To use these connections, two FC daughter boards must be installed on the 4-way server blade (see manual for the relevant server blade type).

The following figure illustrates the assignment of the FC pass-thru blades to the Fibre Channel ports of the server blades in a configuration with five 4-way server blades when two FC pass-thru blades and, in each 4-way server blade, two FC daughter boards are installed in the back of the server.

FC pass-thru blade 1 FC pass-thru blade 2

1	2	3	4	5	6	7	8	9 10	1	2	3	4	5	6	7	8	9 10
A B A B A B A B A B A B A B A B A B A B

Server	Server	Server	Server	Server
blade 1	blade 2	blade 3	blade 4	blade 5

Figure 73: Fibre Channel port assignment with five 4-way server blades

120 PRIMERGY BX600 S2 Basic Unit