Fujitsu BX600 S2 manual Replacing an Ethernet Pass-Thru Blade

Port Assignment Ethernet Pass-Thru Blade

The following figure illustrates the assignment of the LAN ports of the Ethernet LAN Pass-Thru-Blades in slots NET3 and NET4 to the channels of the Gigabit Ethernet I/O modules (daughter cards) of the server blades in a configuration with five 4-way server blades.

Gigabit Ethernet	Gigabit Ethernet
pass-thru blade 3	pass-thru blade 4

1	2	3	4	5	6	7	8	9 10			1	2	3	4	5	6	7	8	9 10
A B A B A B A B A B A B A B A B A B A B
	I/O module 1		I/O module 2			I/O module 1		I/O module 2	I/O module 1	I/O module 2	I/O module 1			I/O module 2			I/O module 1		I/O module 2
	Server					Server			Server		Server					Server
	blade 1					blade 2			blade 3		blade 4					blade 5

Figure 57: Port assignment to the Gigabit Ethernet I/O modules with five 4-way server blades

9.3Replacing an Ethernet Pass-Thru Blade

VCAUTION!

●Ethernet pass-thru-blades must always be installed in slots NET1 and NET3 first (see page 101).

An Ethernet LAN Pass-Thru-Blade is installed and removed in the same way as a LAN switch blade (see section “Installing a LAN Switch Blade” on page 93).

104 PRIMERGY BX600 S2 Basic Unit