Adding a Server Blade to the System

Server Blades

Configuration Diagram for a Mix of an 8-way Server Blade with 4-way and 2-way Server Blades

Begin with the 8-way server blade in slots 1-4, followed by the 4-way Server- Blades and the 2-way Server-Blades.

IServer blades with SCSI controller can only be fitted in slots 5 and 6.

1

2

3

4

5

6

7

8

9

10

1

2

3

4

5

Figure 34: Installation sequence for an 8-way, two 4-way and two 2-way server blades

7.2Adding a Server Blade to the Basic Unit

Depending on the desired configuration, the system can be upgraded with up to 10 server blades.

VCAUTION!

Read the safety information and the information on handling electro- static-sensitive components in the section “Components With Electrostatic-Sensitive Devices” on page 25.

Energiegefahr - neu.

Removing the Dummy Module

All unoccupied slots in the basic unit are fitted with dummy modules to ensure that the electromagnetic emission properties of the system are observed and that the system components are properly cooled.

76

PRIMERGY BX600 S2 Basic Unit

Page 76
Image 76
Fujitsu BX600 S2 manual Adding a Server Blade to the Basic Unit, Removing the Dummy Module