Fujitsu BX600 S2 Adding a Server Blade to the System Server Blades, Inserting the Server Blade

Adding a Server Blade to the System Server Blades

Installation is the same as for the server blade (see “Inserting the Server Blade” on page 78).

Inserting the Server Blade

VCAUTION!

Read the safety information and the information on handling electro- static-sensitive components in the section “Components With Electro- static-Sensitive Devices” on page 25.

￿

￿

Figure 36: Turning the eject handles into the unlocked position (2-way server blade)

ÊPress the touch points on the inside of the eject handles (1) of the server blade to disengage the locking mechanism of the handles.

ÊTurn the eject handles outward (2) into the unlocked position.

The 4-way server blade has the same locking mechanism (see figure 37).

￿ ￿

Figure 37: Turning the eject handles into the unlocked position (4-way server blade)

IHow to install a server blade is described in the following using the example of a 2-way server blade. 4-way server blades are installed in the

same way.

78 PRIMERGY BX600 S2 Basic Unit