Defective Drive

Troubleshooting and Tips

Added drive is identified as defective

The RAID controller is not configured for the drive. The drive was probably installed while the system was switched off.

ÊYou can configure the RAID controller for the drive after its installation using the relevant utility. For how to do this, see the documentation for the RAID controller (on the ServerBooks CD under the heading “Controllers”).

or

ÊRemove the drive and reinstall it with the system switched on.

If the drive is still identified as defective, you will need to replace it.

160

PRIMERGY BX600 S2 Basic Unit

Page 160
Image 160
Fujitsu BX600 S2 manual Defective Drive, Added drive is identified as defective