HP xw6000 manual Post Error Messages

				POST Error Messages
POST Error Messages
	Screen Message	Beeps*	Probable Cause	Recommended Action
	207-ECC Corrected	2S	Single Bit ECC error.	Verify proper memory module type.
	Single Bit Errors in			Try another memory socket.
	Memory Socket(s) y,y			Replace memory module if problem
				persists.
	212-Failed Processor	None	Processor has failed to	Reseat the processor in its socket.
			initialize.	If the processor does not respond,
				replace it.
	213-Incompatible	2S	A memory module in	Verify proper memory module type.
	memory Module in		memory socket identified	Try another memory socket.
	memory Socket(s)		in the error message is	Replace memory with a module
	X,X, X		missing critical SPD
				conforming to the SPD standard.
			information, or is
			incompatible with the
			chipset.
	214-Memory Device	None	A specific error has	Verify proper memory module type.
	Failure. Error Code: XX		occurred in a RDRAM	Try another memory socket.
	Memory Module		device installed in the	Replace memory module if problem
	Socket(s):XX		identified socket.
				persists.
	215-RIMM	None	RIMMs not properly	Populate RIMM sockets starting with
	Configuration Error		installed.	slot no. 1 and do not leave any
				memory sockets empty.
	301-Keyboard Error	None	Keyboard failure.	Reconnect keyboard with computer
				turned off.
				Check connector for bent or missing
				pins.
				Ensure that none of the keys are
				depressed.
				Replace keyboard.
	304-Keyboard or	None	Keyboard failure.	Reconnect the keyboard with
	System Unit Error			computer turned off.
				Ensure that none of the keys are
				depressed.
				Replace keyboard.
				Replace system board.
	401-Parallel Port 1	2S	IRQ address conflicts	Reset the IRQ.
	Address Assignment		with another device.
	Conflict
	* L = Long, S = Short

Service Reference Guide C–3