Removal and Replacement Procedures System Board with Major Components
3.To insert the new battery, slide one edge of the replacement battery under the holder’s lip with the positive side up. Push the other edge down until the clamp snaps over the other edge of the battery.
✎After the battery has been replaced, use the following steps to complete this procedure.
4.Replace the computer cover or access panel.
5.Plug in the computer and turn on power to the computer.
6.Reset the date and time, your passwords, and any special system setups, using the Setup utility. Refer to the Computer Setup (F10) Utility Guide.
|
| Service Reference Guide |
