Setup Utilities and Diagnostic Features

 

 

 

 

 

 

 

 

 

 

Heading

Option

Description (Continued)

 

 

 

 

 

 

 

 

PCI Devices

Lists currently installed PCI devices and their IRQ settings.

 

 

 

Allows you to reconfigure IRQ settings for these devices or to

 

 

 

disable them entirely. These settings have no effect under an

 

 

 

APIC-based operating system.

 

 

 

 

 

Advanced

Bus Options

Enables/disables PCI bus mastering, PCI VGA palette

 

 

(continued)**

 

snooping, PCI SERR# generation, and ECC on select models.

 

 

 

 

 

 

 

Device options

Allows you to set printer mode (EEP+ECP), Output only,

 

 

 

bidirectional, and NumLock state at power-on.

 

 

 

Enable/disable Power Management Events (PME) wakeup

 

 

 

events, processor cache, processor number, ACPI thermal

 

 

 

mode, and ACPI S3 support. (When ACPI S3 is enabled you

 

 

 

may also enable/disable ACPI S3 video repost, PS/2 mouse

 

 

 

wakeup, and hard disk reset.)

 

 

 

Allows you to select AGP aperture size (4, 8, 16, 32, 64, 128,

 

 

 

or 256 MB).

 

 

 

Enables monitor tracking.

 

 

 

 

 

 

 

PCI VGA

Allows users to specify which VGA controller will be the “boot”

 

 

Configuration

or primary VGA controller.

 

 

 

Appears only if there are multiple PCI video adapters in the

 

 

 

system.

*Option not supported on all products.

**These options should be used by advanced users only.

 

Service Reference Guide

2–9