
2
Setup Utilities and Diagnostic Features
Setup Utilities (F10) and diagnostic features provide information needed about the computer system when contacting HP Customer Support. These tools can also be used to:
■Change factory default settings and to set or change the system configuration, which may be necessary when you add or remove hardware.
■Determine if all of the devices installed on the computer are recognized by the system and functioning properly.
■Determine information about the operating environment of the computer.
■Solve system configuration errors detected but not automatically fixed during the
■Establish and manage passwords and other security features.
■Establish and manage
✎All features identified in this chapter may not be available on all HP products.
Power-On Self-Test (POST)
POST is a series of diagnostic tests that runs automatically when the system is turned on, POST checks the following items to ensure that the computer system is functioning properly:
■Keyboard
■Memory modules
■Diskette drives
■All IDE and SCSI mass storage devices
■Processors
■Controllers
✎If the
If POST finds an error in the system, an audible and/or visual message occurs. Refer to Appendix C for POST error messages and their solutions.
| Service Reference Guide |