HP CommonIO Products ISO, Table C-2, Table C-3, Diagnostic, Explanation, Description, Packet Not Allowed, Packet Type Invalid (Continued)

				Diagnostic Messages
				X.25 Diagnostic Messages
Table C-2		Packet Type Invalid (Continued)
	25 (CLEAR)		Packet type	Invalid packet received on VC in state P6 (DTE
			invalid for state	Clear Request).
			P6.
	27 (RESET)		Packet type	Invalid packet received on VC in state D1 (Flow
			invalid for state	Control Ready).
			D1.
	29 (RESET)		Packet type	Invalid packet received on VC in state D3 (DCE
			invalid for state	Reset Indication).
			D3
Table C-3		Packet Not Allowed
	Diagnostic		ISO	Explanation
			Description
	33 (RESTART,		Unidentifiable	Packet that cannot be identified (3rd byte of the
	CLEAR,		packet.	level 2 information field not defined in CCITT
	RESET)			X.25 Recommendation received).
				REJECT or REGISTRATION packet received.
	34 (CLEAR)		Call on one way	If configured as DTE, CALL INDICATION
			logical channel.	received with logical channel identifier (LCI)
				corresponding to one-way logical channel
				outgoing.
				If configured as DCE (DXE), CALL
				INDICATION received with logical channel
				identifier (LCI) corresponding to one way logical
				channel incoming.
	38 (RESTART,		Packet too	Received packet is less than minimum length. It
	CLEAR,		short.	may be a CALL INDICATION packet without
	RESET)			address length or facility length fields, CLEAR
				or RESET INDICATION without cause field, or
				the packet length may be insufficient to hold
				address or facility fields.

Appendix C 245