HP CommonIO Products manual 108

OLA/R Overview and Concepts

How to On-line Add (OLA) a J3525A PCI Card using SMH

Output messages from the CRA process are presented in the Analyze Critical Resources screen which will be shown before you can proceed. The messages displayed on this screen and the availability to continue on from it (“OK” button activated) depend on the results of the analysis.

Table 4-3		Three Possible Critical Resource Analysis (CRA) Outcomes
				Screen	Buttons
		Outcome	Notes		Activate	User Actions
				Displays
					d
		No	At this point, you	“No affected	OK and	Click “Cancel” to
		critical	can still cancel	resources are	Cancel	halt the operation no
		resources	the replacement	critical or		change to the
		identified.	process.	in-use” and		system. Or,
				“Critical		Click “OK” to take
				Resource
						you to the next step .
				Analysis
				complete”
				messages.
		Critical	SMH will not	Detailed	Cancel	Click “Cancel” to
		resource(s	allow the	message		halt the operation
		)	operation to	describing the		with no change to
		identified.	proceed.	affected		the system
				critical
				resource.
		Other	SMH reports	Detailed	OK and	Click “Cancel” to
		resources	other resources	message	Cancel	halt the operation
		identified.	that are in use	describing		with no change to
			with no detectable	these		the system.
			alternates. For	resources.		Click “OK” to
			these resources,
						continue operations
			you can cancel or
						based on your
			continue the
						knowledge of the
			operation based
						information being
			on your
						reported.
			knowledge of the
			current system
			configuration.
		SMH displays a dialog indicating that the selected slot has power
		disabled and it is now safe to add the card to the desired slot.
Step	9. At this point, the amber LED is activated and the green LED is off. Now
		add the new PCI card. Refer to the system manual for the insertion of the
		PCI card.

108 Chapter 4