HP CommonIO Products Sample setup and Configuration

Configuration

Configuring X.25 over LLC2

config_file is the generic X.25 product configuration file and llc2_config_file is the LLC2 specific configuration file.

A sample invocation is as shown below:

x25init -c x25init_def -L llc2_conf_def

This command is executed once per box. It can be executed with different <x25init_llc2_sampl> file but with the same <llc2_conf_def> file.

Stopping

To stop the communication with one box, the x25stop command is executed with the -L option.The syntax for execution is:

x25stop -d <lan#> -L <XOL_logical_port_id>

NOTE

NOTE

<XOL_logical_port_id> is the XOL logical port identifier for the XOL interface on the given LAN card.

SMH support is not available for configuring X.25 over LAN(LLC2). Also, the x25init command needs to be executed manually if the system is rebooted.

For a detailed description of the configuration, see x25overllc2 (7). For more information on how to configure High Availability, see “Configuring the High Availability Feature” on page 76.

For more information on LLC2, see x25init (1M), x25stop (1M), and x25stat (1M) manpages.

To configure a Highly Available XOL interface, See “X.25 High Availability Configuration” on page 78.

Sample setup and Configuration

The X.25 over llc2 supports one or more XOL interfaces. Following are the two example configurations:

Chapter 3 61