HP CommonIO Products READ, LOGNAME, dave# padem, dave# uusnap, dave# x25check, bill# x25server, dave# cu -d9bill, WRITE=/ \COMMANDS=ALL, dave# x25check [bill’s X.121 address]

PAD Services

UUCP Support (x29uucpd)

READ=/ \WRITE=/ \COMMANDS=ALL

where the LOGNAME parameter creates a link with dave’s Systems file.

Step 11. Test the X.25 connection using:

bill# x25serverdave# x25check [bill’s X.121 address]

If successful, you will receive the message “Remote connection succeeded.”

Step 12. Test the files: x29hosts, x3config (at bill) using: dave# padem [bill’s X.121 address]

If successful, you will receive the “login” message and you will be able to enter your details.

Step 13. Test the files: x29hosts, x3config, Systems, Devices (at dave) using:

dave# cu -d9 bill

If successful, you will receive an output something like:

Autodialing - please wait call dial(1761259328)

baud=19200, speed=19200, line=(null), telno=- call find_dev(15076527500)

baud=19200, speed=19200, line=(null), telno=- nomodem is 0

fixline(6, 19200) fixline - direct MDTR was not set gdial(direct) called call mode(1) Connected transmit started receive started

Generic-Sys (generic) [HP Release A.B9.04]

login:

If you don’t see the “login:” prompt, type dave# uusnap. You should receive the following output:

x29 --- --- --- LOCKED (pid 57602)

Chapter 6 153