Configuration

 

 

 

 

Configuring X.25 over LLC2

def_inwindow

7

# default

window size

def_outwindow 7

# default

window size

def_inthruputclass 19200

 

#

default thruput class

def_outthruputclass 19200

#

default thruput class

flowcontrol

on

 

# flow control negotiation allowed

neg_inpacketsize 128

# offered

packet size if using flow control negotiation

neg_outpacketsize 128 # offered packetsize if using flow control negotiation

neg_inwindow 7

# offered window size if using flow control negotiation

neg_outwindow 7 # offered window size if using flow control negotiation

thruputclass on

 

 

neg_inthruputclass 19200

# offered thruput class if using thruput class

negotiation

 

 

neg_outthruputclass 19200

# offered thruput class if using thruput class

negotiation

 

 

pvc_inpacketsize 128

# packetsize for PVCs

pvc_outpacketsize 128

# packetsize for PVCs

pvc_inwindow 7

 

# window size for PVCs

pvc_outwindow 7

 

# window size for PVCs

# IP Related Parameters

 

IP 15.4.64.120

255.255.248.0

# IP address and subnet mask

mtu 1024

 

# max transmission unit 1024 octets

hold 300

 

# 5 minute hold timer

idle 600

 

# 10 minute idle timer

NOTE

For an XOL configuration, L3 packet sizes greater than 1024 are not

 

supported.

 

 

If the XOL interface on the host is connected to a router supporting X.25 over LLC2, the router must be configured with the correct routing entries. For example, if an XOL interface on the host is connected to a CISCO router and the XOL configuration on the host is identical to the configuration in the previous example, the following configuration is required:

Chapter 3

59