HP CommonIO Products Configuring the UNIX Line-printerSpooler for x29printd

	PAD Services
	Remote PAD Printer Support (x29printd)
x3	Optional. This is the X.3 configuration set name for
	this x29server login session. If used, the configuration
	set name (and X.3 parameter set) must also exist in

/etc/x25/x3config. If more than one X.3 configuration set with the same name exists, the first one found in the file is used.

If there is no configuration set name in /etc/x25/x29hosts or no matching X.3 configuration set name in /etc/x25/x3config, default values are used.

Configuring the UNIX Line-printer Spooler for x29printd

The remote PAD printer must also be configured in the spooler system in order for remote printing to work with the standard UNIX LP commands. To configure a remote PAD printer in the spooler system, execute the following command:

lpadmin -v <device name> -p <printer name> -m <printer model>

-p	Printer name is the name given to this printer at the
	user level. This is the same name specified with the lp
	command’s -doption (used when you print a file to a
	printer).
-v	Device file name is /dev/x29/[device name]. The
	value for device name is the same character string as
	the one entered in the device entry in the
	/etc/x25/x29hosts file.
-m	Printer model is the HP printer model name (for
	example, thinkjet, laserjet, hp2563a, etc.).
	The lpadmin command associates the printer name
	with the device file name in /etc/x25/x29hosts and
	maps this name to the remote X.121 address of the
	printer.

Chapter 6 143