HP CommonIO Products ISO, ISO, ISO, Table C-5, Table C-6, Table C-7, Table C-8, Diagnostic, Diagnostic, Diagnostic, Explanation, Description, Explanation, Description

				Diagnostic Messages
				X.25 Diagnostic Messages
Table C-5		Call Setup, Call Clearing, or Registration Problem (Continued)
	73 (CLEAR)		Duplicate	Same facility code appeared twice in the facility
			facility	field. Error is returned to caller if condition was
			requested.	detected in CALL REQUEST. CLEAR was not
				generated.
	76 (CLEAR)		Facility not	When system was configured to handle IP over
			provided when	X.25 as per DDN specifications, CALL
			expected.	INDICATION for IP did not have DDN standard
				selection facility code.
Table C-6		CATEGORY - Miscellaneous
	Diagnostic		ISO	Explanation
			Description
	83 (CLEAR)		Inconsistent Q	The connection was cleared due to an
			bit setting.	inconsistent Q bit found in the packet.
Table C-7		International Problem and Maintenance
	Diagnostic		ISO	Explanation
			Description
	113 (CLEAR)		Remote	The remote network is not operational.
			network
			problem.
	115 (CLEAR)		International	Connection to the PSN is not currently available
			link out of	(network not operational).
			order.
	121 (CLEAR)		Unknown	The CALL could not be routed because the DNIC
			called DNIC.	in the called address is unknown.
	122 (CLEAR,		Maintenance	System administrator shut down specific VC or
	RESET)		action.	the entire interface.
Table C-8		DTE-Specific Signals
	Diagnostic		ISO	Explanation
			Description

Appendix C 251