HP CommonIO Products -l3, Step, Step, Step, Step, Step, logging, pad_spt, logging, pad_uucp, default_x3, hp_padsrvr, device bill, remote_x121, LOGNAME=uucp, name interface0

PAD Services

UUCP Support (x29uucpd)

pad_uucp {device billname interface0remote_x121 [bill’s X.121_address]

		logging	3
		x3	default_x3
		}
		Refer to “Configuring the x29hosts file” earlier in this section for the
		definitions of these parameters.
Step	6.	Launch /usr/sbin/x29uucpd at the HP-UX command prompt.
		At the “bill” system:
Step	7. Make the following modifications to the pad_spt section of
		/etc/x25/x29hosts file:
		pad_spt {
		remote_x121	[dave’s X.121_address or
			“*” for all addresses]
		logging	3
		x3	hp_padsrvr
		}
		Refer to “Configuring the x29hosts file” earlier in this section for the
		definitions of these parameters.
Step	8.	Launch the x29server process with /usr/sbin/x29server -l3for
		example.
Step	9. Verify the contents of /etc/passwd (this file is linked with dave’s
		Systems file) which should look like this:
		uucp::5:3::/var/spool/uucppublic:/usr/lib/uucp/uucico
		At the terminal prompt, assign the password “test” to the uucp user:
		bill# passwd uucp

Step 10. Add the following lines to the /usr/lib/uucp/Permissions file:

LOGNAME=uucp \SENDFILES=yes REQUEST=yes CALLBACKI=no \

152 Chapter 6