HP CommonIO Products manual 172

PAD Services

X.3 Parameter Descriptions

Table 6-10	(Continued)
	18	- Line Display	Specifies which character to use for the line
			display character (when editing is allowed). The
			range is 0 through 127.
	19	- Edit Service	Specifies whether and how PAD service signals
	Signals		can be edited. This parameter is valid when the
			setting of X.3 Parameter 6 is not 0. The possible
			values are shown below.

Table 6-11
	Value	Meaning
	0	No editing permitted.
	1	Editing permitted for printing
		terminals.
	2	Editing permitted for display
		terminals.
	8 OR	Editing permitted using specified
	32 to 126	character.

NOTE	If you specify a value greater than 7, that value specifies the editing
	character. This parameter is available only for networks using the 1984
	standard.
Table 6-12
	X.3 Parameter	Description
	20 - Echo Mask	This parameter specifies which characters will
		not be echoed. X.3 Parameter 2 - Echo takes
		precedence over this parameter. The possible
		values are shown below.
Table 6-13
	Value	Meaning

172 Chapter 6