HP CommonIO Products Table, Table, Value, Meaning, Description, X.3 Parameter, X.3 Parameter Descriptions

PAD Services

X.3 Parameter Descriptions

NOTE	Parameters 1 to 18 are available for networks using either the 1980 or
	1984 standard. Parameters 19 through 22 only apply to the 1984
	standard.
Table 6-2	X.3 Parameter Descriptions
	X.3 Parameter	Description
	1 - ESC/Data	Specifies whether or not the terminal user will be
	Transfer	allowed to escape from data transfer mode in
		order to send PAD command signals. 0 indicates
		escape is not allowed, 1 permits escape from data
		transfer mode with Ctrl-P, 32 to 126 permits
		escape from data transfer mode with the defined
		character.
	2 - Echo	Specifies whether or not the PAD echoes to the
		local terminal all the characters received from
		that device. 1 turns echoing on; 0 turns echoing
		off.
	3 - Data Fwd	Specifies one of the defined sets of characters for
	Signal 1	use as a data forwarding signal. When one of the
		characters in the set is received from the
		terminal, the PAD terminates the assembly of a
		packet and forwards it to the remote host. The
		possible values are listed below.
Table 6-3
	Value	Meaning

0No data forwarding character.

1Alphanumerics.

2Carriage Return only. (This is the default.)

4	ESC, BEL, ENQ, and ACK only.
8	DEL, CAN, and DC2 only.

166 Chapter 6