HP CommonIO Products Step, Step, Table, Figure, Modify Throughput Class Settings Field Descriptions

Configuration

Configuring the X.25 Link

Step 5. Click on Modify Throughput Class Settings to modify Switched and Permanent VC throughput class settings. The following dialog appears:

Figure 3-7

Step	6. Enter or modify field values as required (refer to the field descriptions
		below).
Table 3-9		Modify Throughput Class Settings Field Descriptions
		Switched VC	CCITT class number. If Throughput Class
		Default: Inbound	negotiation is disabled, this value replaces the
		and Outbound	Switched VC Negotiated field value. The range is
			3 through 13 and the default is 11. See the table
			after these field descriptions listing the CCITT
			class numbers and the corresponding line speed
			Baud rate. Use the value given on your
			subscription form.

Chapter 3 43