HP CommonIO Products ISO, Table C-4, Table C-5, Diagnostic, Explanation, Description, Timer Expired (Continued), Call Setup, Call Clearing, or Registration Problem

				Diagnostic Messages
				X.25 Diagnostic Messages
Table C-4		Timer Expired (Continued)
	50 (CLEAR)		Timer expired	CLEAR CONFIRM not received within T23
			for CLEAR	time limit (set at approximately 180 seconds)
			INDICATION	after transmission of CLEAR REQUEST. After
			(or DTE timer	a certain number of CLEAR retries, system
			expired or	places logical channel in state P1 (Ready).
			retransmission
			count surpassed
			for CLEAR
			REQUEST).
	51 (CLEAR,		Timer expired	RESET CONFIRM not received within T22
	RESET)		for RESET	time limit, set at approximately 180 seconds,
			INDICATION	after transmission of RESET REQUEST. After
			(or DTE timer	a certain number of RESET retries, the system
			expired or	places logical channel in state D1 (Flow
			retransmission	Control Ready) if PVC, or in state P6 (DTE
			count surpassed	Request) by sending CLEAR REQUEST if
			for RESET	SVC.
			REQUEST).	Count of RESET retries has been surpassed.
				CLEAR REQUEST has been sent.
	52 (RESTART)		Timer expired	RESTART CONFIRM not received within T20
			for RESTART	time limit (set at approximately 180 seconds)
			INDICATION	after transmission of RESTART REQUEST.
			(or DTE timer	SABM frame received while in state R2 (DTE
			expired or
				RESTART REQUEST). RESTART REQUEST
			retransmission
				is transmitted.
			count surpassed
			for RESTART
			REQUEST).
Table C-5		Call Setup, Call Clearing, or Registration Problem
	Diagnostic		ISO	Explanation
			Description

Appendix C 247