Configuration

Configuring the X.25 Link

NOTE

If you subscribe to a public network, the network provider will provide

 

the appropriate settings for all level 2 parameters. These settings will

 

differ depending on the network provider and the type of service to which

 

you subscribe. Refer to your Network Subscription Form for the correct

 

settings for your configuration.

 

 

Step 1. At the “Configure X.25 Card” window, select Verify Level 2 Values. The following dialog appears:

Figure 3-8

Select either Modulo-8 or Modulo-128 to set the Level 2 Modulo values. The default is Modulo-8.

The valid window-size values for Modulo-8 range from 1 to 7. For

Modulo-128, the valid window-size values range from 1 to 127.

Chapter 3

45