Configuration

Configuring X.25 over LLC2

 

 

• To enable the cmns, complete the following steps:

Step

1.

Run the following command at the CISCO console:

 

 

Configure Terminal

Step

2.

Run the following command at the CISCO console:

 

 

Interface fastethernet 1/0

Step

3.

Run the following command at the CISCO console:

 

 

cmns enable

Step

4.

Run the following command at the CISCO console:

 

 

<Ctrl+Z>

•To add routing entries to X.25 routing table, complete the following steps:

Step

1.

Run the following command at the CISCO console:

 

 

Configure Terminal

Step

2.

Run the following command at the CISCO console:

 

 

x25 route ^ 7111 interface FastEthernet1/10 mac

 

 

0011.0a80.31d6

Step

3.

Run the following command at the CISCO console:

 

 

x25 route ^ 7222 interface FastEthernet1/10 mac

 

 

0800.09c4.728a

Step

4.

Run the following command at the CISCO console:

 

 

<Ctrl+Z>

Starting and Stopping Configuration

Starting

To initialize the x25overllc2 devices, execute the x25init command with the -L option at the command prompt.

The syntax for execution is:

x25init -c <config_file> -L <llc2_config_file>

60

Chapter 3