HP CommonIO Products Table, Table, Value, Baud Rate, (Continued)

				PAD Services
			X.3 Parameter Descriptions
Table 6-6	(Continued)
	8 - Discard		This parameter restores data delivery to the
	Output		terminal after the reception of the break
			character and value 16 has been specified for X.3
			Parameter 7. This value may be modified by the
			reception of the break character. 0 indicates
			normal data delivery, and 1 indicates that data is
			discarded.
	9 - Number of CR		Specifies the number of buffer characters to be
	Padding Chars		added following a carriage return. This is used for
			hard copy terminals to allow time for the carriage
			to return to the left side of the page. The range is
			0 through 7.
	10 - Chars per		Specifies the number of printing characters to be
	Line/Wrap		transmitted before the PAD inserts a carriage
	-Around		return in the data stream. This parameter is not
			needed on terminals with auto-wrap-around. The
			range is 0 through 255.
	11 - Baud		This parameter specifies the terminal access
			speed (Baud rate). x29server does not allow
			users to change the Baud rate. It defaults to the
			terminal Baud rate, which is usually 9600. The
			possible values and their associated Baud rates
			are listed below.
Table 6-7
	Value		Baud Rate
	0	110
	1	134.5
	2	300
	3	1200
	4	600
	5	75

Chapter 6 169