HP CommonIO Products File, Table, Contents, Mandatory, pad_uucp Parameters, Configuring the x29hosts file

PAD Services

UUCP Support (x29uucpd)

NOTE	See the man pages for x29uucpd for full details on syntax and
	parameters.
Table 6-1
	File	Contents
	/etc/x25/x29hosts pad_uucp	parameters for each remote
		host
	/etc/passwd	uucp entry
	/etc/x25/x3config	optional X.3 parameters
	/usr/lib/uucp/Systems	remote system’s name
	/usr/lib/uucp/Permissions	remote system’s login name
	/usr/lib/uucp/Devices	device file name

Configuring the x29hosts file

The /etc/x25/x29hosts file must contain a separate pad_uucp section for each remote site. An example pad_uucp section is shown below.

pad_uucp {
device	x25uucp
name	interface0
remote_x121	4085551113
cud	abc
cug	2
logging	3
reverse_charge	enable
x3	hp_uucp
}

pad_uucp Parameters

device	Mandatory. This is the device file name located in the
	/dev/x29 directory. It is created when x29uucpd is
	executed and is used for communication between
	UUCP and x29uucpd. This device file must also exist in
	/usr/lib/uucp/Devices file for the UUCP system.

148 Chapter 6