HP CommonIO Products Step, Step, Step, Step, Step, Step, Step, WARNING, Chapter, DISCONNECT messages. The connections will have to be

		OLA/R Overview and Concepts
		How to On-line Replace (OLR) a J3525A PCI Card using SMH
		How to On-line Replace (OLR) a J3525A PCI
		Card using SMH
		When performing online replacemant, the stack for all the ports
WARNING
		of the interface card under consideration will be stopped before
		repalcement. They will be restarted after the repalcement. Thus
		any user application which has open connections will receive
		DISCONNECT messages. The connections will have to be
		re-established after successful replacement of the interface card.
Step	1.	Start SMH.
Step	2.	From the SMH Areas screen, select PeripheralDevices.
Step	3.	From the PeripheralDevices screen, select Cards.
Step	4.	From the I/O Cards screen, view the list of available I/O cards. Select
		from the possible entries mentioned below:
		• HP J3525A PCI 2-port PSI card
Step	5.	From the Menu bar, select Actions.
Step	6.	From the Actions drop-down list, select Replace.
Step	7.	SMH now performs a Critical Resource Analysis (CRA). That is, now
		that you have selected to Replace a card, SMH’s first step is to confirm
		that no critical resources will be disabled when the card is taken off-line.

Chapter 4 103