HP CommonIO Products manual 171

PAD Services

X.3 Parameter Descriptions

Table 6-9 (Continued)

1Line feed inserted after carriage return in data stream to the terminal.

2Line feed inserted after carriage return in data stream from the terminal.

4Line feed inserted after carriage return when echoed to the terminal.

NOTE	The values listed for parameter 13 may be combined by specifying the
	sum of the values. For example, specifying 3 is the same as specifying 1
	and 2.
Table 6-10
	X.3 Parameter	Description
	14 - Line Feed	Specifies the number of padding characters to be
	Padding	added following a line feed. This is used for hard
		copy terminals to allow time for the paper to be
		moved up. The range is 0 through 7.
	15 - Editing	Specifies whether data editing is allowed from
		the terminal during data transfer (for example,
		character delete and line delete). 1 indicates that
		editing is allowed; 0 indicates that no editing is
		allowed.
	16 - Character	When editing is allowed, specifies which
	Delete	character to use for character delete. The range is
		0 through 127.
	17 - Line Delete	Specifies which character to use for the line
		delete character (when editing is allowed). The
		range is 0 through 127.

Chapter 6 171