Snapper SZT18336BVE, SZT18386BVE important safety instructions Adjustments & Repair, 38” DECK

Models: SZT18336BVE SZT18386BVE

1 36
Download 36 pages 18.76 Kb
Page 19
Image 19
38” DECK

Section 4 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage.

3.In cases of severe tracking, one plate may need to be moved fully back and the other moved fully forward.

SPINDLE PULLEY

SPINDLE PULLEY

IDLER

PULLEYSTATIONARY

PULLEY

38” DECK

ADJUST

TRACKING

ADJUSTMENT

PLATE

FIGURE 4.1c

ADJUST UNTIL LEVERS ARE ALIGNED

LEVER ALIGNMENT SCREWS

ELECTRIC

CLUTCH

PULLEY

FIGURE 4.2a

4.3.2. MOWER DRIVE BELT REPLACEMENT

Inspect mower drive belt. Replace belt if signs of

excessive wear and/or damage are present.

4.2 ENGINE ADJUSTMENTS & REPAIR

Refer to the engine owner’s manual for those adjustments and/or repairs that can be made by the owner.

4.3MOWER DECK & COMPONENT ADJUSTMENTS The following mower deck and component adjustments and repairs can be made by the owner. However, if there is difficulty in achieving these adjustments and repairs, it is recommended that these repairs be made by an authorized SNAPPER dealer.

4.3.1. MOWER DRIVE BELT ADJUSTMENT

The 33” and 38” mower deck drive belts do not require any adjustment. If the belt does not drive blade properly, replace belt as needed. Refer to

Section “BELT REPLACEMENT”. Belt routing shown on this page. See Figures 4.2 & 4.2a.

SPINDLE PULLEY

ELECTRIC CLUTCH PULLEY

IDLER PULLEY

33” DECK

FIGURE 4.2

4.3.3. BELT REMOVAL

1.Remove footrest/floor pan assembly. Refer to Section “FOOTREST REMOVAL”.

2.Remove old belt.

4.3.4. BELT REPLACEMENT

1.Route new belt around electric clutch pulley. See Figure 4.3.

MOWER

BELT Manual backgroundROUTE MOWER BELT AROUND ELECTRIC CLUTCH PULLEY

ELECTRIC

CLUTCH

VIEW SHOWN FROM UNDERNEATH WITH

DECK REMOVED, DECK REMOVAL NOT

NECESSARY FOR MOWER BELT

REPLACEMENT

FIGURE 4.3

(Continued On Next Page)

19

Page 19
Image 19
Snapper SZT18336BVE, SZT18386BVE important safety instructions Adjustments & Repair, 38” DECK