JBL SCS 188 manual P H A S E, O P E R At I O N, with, the Crossover Control ¢, Subwoofer

Models: SCS 188

1 10
Download 10 pages 53.48 Kb
Page 7
Image 7
O P E R AT I O N
AC 230V~50Hz
200 Watts
180°
signal after approximately twenty minutes, it will automatically go into standby mode. If you will be away from home for an extended period of time, or if the subwoofer will not be used, switch the Master Power switch ¡ to the "OFF" position.

O P E R AT I O N

Press the Master Power Switch (marked Power ¡) to the ON position to use the subwoofer. When your receiver or amplifier is off, or is not sending program material to the subwoofer, the subwoofer will be in standby mode. When the subwoofer senses an audio signal, it will automatically turn itself on. If the subwoofer does not sense a

¢ ¡

 

HIGH LEVEL

 

LINE LEVEL IN

 

 

+

L

R +

 

 

 

 

 

OUT

 

 

 

LFE

L

0° PHASE

IN

 

 

 

 

 

 

 

R

 

IMPORTANT: CONNECT STRIPED WIRE TO RED (+ ) SPEAKER TERMINAL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

P H A S E

The Phase Control ™ determines whether the subwoofer’s piston- like action moves in and out in phase with the main speakers or opposite the main speakers. This is adjusted by pressing the button to the 0°, or 180° position. The 0° position of the phase button plays the bass signal in phase with the main speakers. The 180° position plays the bass signal 180º, or out of phase with the main speakers. Proper phase adjustment

£depends on several variables such as subwoofer placement and listener position. Adjust the phase switch to optimize bass output at the listening position.

Every system, room and listener is different. There are no right or wrong settings. This switch offers the added flexibility to adjust your subwoofer for optimum performance for your specific listening conditions without having to move your speakers. If at some time in the future you happen to rearrange your listening room, and move your speakers, you should experiment with the phase switch in both positions, and leave it in the position that optimizes bass performance for your taste.

Volume

Volume can be adjusted using the Subwoofer Volume Control £, as shown.

Subwoofer

Level

Crossover

The crossover filter between

optimum setting for the

the subwoofer and satellites

SCS

178 and SCS 188 system

is

can be adjusted using the

with

the Crossover Control ¢

Crossover Control ¢. The

set to the "Min" position.

Subwoofer

 

 

 

 

 

 

 

 

 

 

Level

 

 

 

 

 

MIN MAX

MIN MAX

7

Page 7
Image 7
JBL SCS 188 manual P H A S E, O P E R At I O N, with, the Crossover Control ¢, Subwoofer