Sharp XG-F210X, XG-F260X Adjusting the Projected Image “SCR - ADJ” Menu, Setting the Resize Mode

Adjusting the Projected Image

(“SCR - ADJ” Menu)

Menu operation n Page 37

	Picture	SCR - ADJ	PRJ - ADJ	Help
1	Resize		Border
2	Image Shift	0
3	Keystone	0
4	OSD Display		On
5	Background		Logo
6	Setup Guide		On
7	PRJ Mode		Front
8	Language		English
	SEL./ADJ.	ENTER		END

1 Setting the Resize Mode

Note

•For details of the Resize mode, see pages 30 and 31.

•You can also press RESIZE on the remote con- trol to set the resize mode. (See page 30.)

2 Adjusting the Image Position

You can move the projected image vertically.

3 Keystone Correction

When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trap- ezoidal distortion is called Keystone Correction.

Select “Keystone” on the “SCR-ADJ” menu and adjust with the slide bar.

See page 28 for details of Keystone Correction.

Q button O button

O button Q button

Note

•You cannot set this item when “Resize” is set to “Normal”.

Note

• The Keystone Correction can be adjusted up
to an angle of approximately ±20 degrees
(when “Resize” is set to “Normal”).	Features Useful

41