2-3
2.2 LCD/LED Indications and Adjustment Cont rols 1 LCD
The eight-character LCD screen displays the current printer status,
configuration settings, or an error message.
2 LEDs
Power: The green LED power indicator goes on when the power is tuned ON.
Error: The red LED error indicator goes o n when an error occurs.
3 Adjustment controls
The three adjustment controls are used to adjust the paper gap (transparent
type) sensor sensitivity, black line (reflective type) sensor sensitivity, and LCD
contrast.
When the power is turned on, the printer enters normal operating mode.
The contr ol keys f unction as follows :
n Pause key
Temporarily pauses printing. "Pause" is displayed o n the LCD screen.
If pressed during printing, printing will stop after the current label is printed.
Press the Pause key again to resume printing.
n Feed key
Advance to the top of the next label. When using continuous paper,
make sure the Sensor selection is set to ContinuP or a Paper error will
result.
n Stop key
With this key, the operator can stop and cancel the current print job. P ressing
the Stop key during printing stops the printing immediately. Pressing the Stop
key again cancels the print job.