Image Projection (Continued)
Correcting Trapezoidal Distortion
When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally.The function for correcting trapezoidal distortion is called Keystone Correction.
Note
•The Keystone Correction can be adjusted up to an angle of approximately ±20 degrees and the screen can also be set up to an angle of approximately ±20 degrees (when the resize mode is set to “NORMAL” (see page 30)).
Adjustment buttons (P/R/O/Q)
RETURN button
KEYSTONE button
1 Press KEYSTONE to enter the Keystone Correction mode.
•You can also display the
2 Press P/Q or O/R to adjust the
Keystone Correction.
•You can also adjust the Keystone Cor- rection using the adjustment buttons on the projector.
Note
•To return to the default setting, press RETURN while the
3 Press KEYSTONE.
•The
•You can also use KEYSTONE on the pro- jector.
On-screen display (Keystone Correction mode)
| KEYSTONE | 0 |
|
|
|
|
|
| ADJUST |
|
|
| END |
| |
Shrinks upper side.
(Move the slide bar in the + direction.)
Shrinks lower side.
(Move the slide bar in the - direction.)
Info
•While adjusting the image using Keystone Correction, straight lines and the edges of the image may appear jagged.
28
