Furuno RC-1500-1T manual Remote Control of FURUNO SSB Radiotelephone, 2-12, Mode selection, Tx Rx

2.11Remote Control of FURUNO SSB Radiotelephone

A FURUNO SSB radiotelephone can be controlled from the radiotelephone setting screen, which may be displayed by pressing the [1/ RT/2182] key. You can enter desired frequency by designating channel as below or entering Tx and Rx frequencies as on the next page. The handset must be off hook to set the radiotelephone.

Note: To set the SSB radiotelephone to 2182 kHz/J3E, press the [1/ RT/2182] key more than 2 sec.

Mode selection

1.Press the [1/ RT/2182] key to display the radiotelephone setting screen.

2.Select the MODE field with the Cursor Pad and press the [ENT] key.

3.Select mode desired and press the [ENT] key.

TELEPHONE:Telephone

NBDP/DSC: NBDP Terminal, DSC Terminal

FAX: Facsimile

MODE: TELEPHONE

CH: 12034

Tx: 12329.0

Rx: 13176.00

POWER: HIGH

TUNE

VOLUME

		With MODE selected		MODE:
						TELEPHONE
				CH:
		press [ENT].				NBDP / DSC
				Tx:
KHZ						FAX
KHZ				Rx:	13176.00
			POWER: HIGH
				TUNE
	32		VOLUME

KHZ

KHZ

32

Channel selection

Channel cannot be selected when the MODE is FAX. 1. Select the CH field and press the [ENT] key.

MODE : TELEPHONE
CH: - - - - -			Select CH and
Tx: - - - - - - -	KHZ		press [ENT].
Rx: - - - - - - - - -	KHZ
POWER: HIGH
TUNE
VOLUME		24

MODE	: TELEPHONE
	----	-		-
TX:	- - - - - - -		KHZ
RX:	- - - - - - - - -		KHZ

POWER: HIGH

TUNE

VOLUME 24

2.Channel can be entered directly with the numeric keys, or with the cursor pad. By numeric keys

Use the numeric keys to enter band and channel and then press the [ENT] key.

2-12