Furuno RC-1500-1T manual Copying and pasting text, 9 Appearance of highlighted text

4.Press [1] to select Cut. The highlighted text is cut and the remain- ing text is reformatted. If a mistake is made, you can immediately restore the text by pressing [Insert].

5.To move text to a new location after it has been cut, place the cursor at the exact spot in the message where the cut text is to start. When the text cursor is placed correctly, press [F2] and then [3] (Paste).

Copying and pasting text

1. Select the text you want to copy.

Figure 3-9 Appearance of highlighted text

2.Press [F2] to display the Edit menu.

3.Press [2] to select Copy. The text selected is copied to the internal clipboard.

4.Place the cursor at the exact spot on the message where the cop- ied text is to start.

Figure 3-10 Cursor selects location where to paste text

3-5