Furuno RC-1500-1T Enabling Timer Operation, Stopping Timer Operation, 10 Timer operation list

5.8 Timer Operation

A built-in timer permits automatic transmission and reception of telex messages.

Enabling Timer Operation

1.Press function key [F3] to display the Operate menu.

2.Press the [7] key to display the Timer Operation List.

3.Select the operation (name) you wish to execute. Press the [En- ter] key. An asterisk appears beside the operation selected and "T. Op" appears in inverse video on the communication status display. If a file from a floppy disk is to be sent, be sure the floppy disk containing the file is inserted in the drive.

Timer Operation List

*1

2

3

OP4

OP5

Figure 5-10 Timer operation list

4.Select another operation (name) if desired.

5.Press the [Esc] key.

When the predetermined time comes, the DP-6 automatically sends or receives messages. The results of timer operation are displayed as either OK or NG (No Good) on the Timer Operation List.

Timer Operation List

*1	OK
2
*3	OK
*OP4	OK
*OP5	NG

Figure 5-11 Timer operation list

Stopping Timer Operation

1.Press function key [F3].

2.Press the [7] key.

3.Select the operation (name) which has asterisk attached to it and then press the [Enter] key. Remove all asterisks to cancel all timer programs.

5-11