Furuno RC-1500-1T manual Saving a File

4.2 Saving a File

Before you can save a file to a floppy disk, the disk must be for- matted. 2HD Type is only available.

Formatting Floppy Disks

1.Press function key [F1].

2.Press the [0] key to select "Floppy Disk Format".

3.Press the [−] key to select "YES".

4.Press the [Enter] key.

5.Insert a new floppy disk and press the [Enter] key.

Saving a File

1.Press function key [F1] to display the File menu.

2.Press the [3] key. The screen should look something like Fig- ure 4-2.

Close Text

Save file ?

( UNTITLED1 )

Yes

No

Figure 4-2 Close text screen

3.Press the [Enter] key. Enter file name, using up to eight charac- ters.

You may use any alphabet or numeric on the keyboard. But you may not use the following punctuation symbols;

!

: " > < ;

You may add an extension at the end of the file name, for ex- ample, .TXT, to distinguish text file from macro file.

4. Press the [Enter] key.

Note: When the working area is full, the message "File can't open" appears. Then, you would close a file to clear a working area in order to open the file desired.

4-2