Furuno RC-1500-1T manual Preparing Send Messages, Preparing Individual Call Messages

6. PREPARING SEND MESSAGES

In Chapter 4 you learned how to prepare and send individual, group, geographical area and PSTN calls. In this chapter you will learn how to prepare and store them (including test calls) for future transmission. 150 such files can be stored.

6.1Preparing Individual Call Messages

1.Press the [#/SETUP] key to open the Setup menu.

2.Select MESSAGE and press the [ENT] key.

3.Press the [ENT] key to open the CALL TYPE menu.

*Message file entry

CALL TYPE	INDIVIDUAL
STATION ID	PSTN CALL
COM. TYPE	GROUP CALL
	AREA CALL
COM. FREQ
	TEST CALL
DSC FREQ

4. Use or to select INDIVIDUAL and press the [ENT] key.

5. Press the [ENT] key to open the STATION ID entry window.

*Message file entry

CALL TYPE	: INDIVIDUAL
STATION ID	- - - - - - - - -
COM. TYPE
	:	TELEPHONE
COM. FREQ	: NO INFO
DSC FREQ	: 2M-INTL

How to input station ID automatically

If you have previously registered some station IDs, you can insert them into your message as follows:

1.Press the [FILE] key after completing step 4 in the above procedure. The following display appears.

Select ID file	Note: You can print the
COAST STATION	Select ID file list by pressing
SHIP STATION	the [8/PRINT] key.

2.Select COAST STATION or SHIP STATION and press the [ENT] key.

3.Select file which contains ID you want to use (press 4to show ID number).

4.Press the [ENT] key to insert ID number in message.

6.Key in ID of coast station or ship station which is to receive the call and press the [ENT] key.

6-1