Furuno RC-1500-1T manual NCS channel list

		Setup
	Configuration					NCS Channel List
									ENT: set		ESC: quit
No	AOR (WEST)				AOR (EAST)			POR			IOR
	ID			FREQ	ID	FREQ	ID		FREQ	ID	FREQ
1	044		11080*		144	12580*	244	12580*		344	10840*
2	0				1		2			3
3	0				1		2			3
4	0				1		2			3
5	0				1		2			3
6	0				1		2			3
7	0				1		2			3
8	0				1		2			3

Figure 2-30 NCS channel list

4.Current NCS common channels are marked with an asterisk. These channels cannot be changed.

5.Place the cursor where there is no data entered.

6.Press [Enter] to open the text window.

7.Enter NCS channel ID number.

8.Press [Enter] to close the text window.

9.With [ /] advance the cursor to the frequency column.

10.Press [Enter] to open the text window.

11.Enter NCS channel frequency code.

12.Press [Enter] to close the text window.

13.Press [Esc] to open the update window.

Setup

Configuration

NCS Channel List

ENT: set ESC: quit

No	AOR (WEST)		AOR (EAST)			POR
	ID	FREQ	ID	FREQ	ID	FREQ
1	044	11080*	144	12580*	244	12580*
2	0		1		2
3	0		1		2
4	0		1		2
5	0		1		2
6	0		1		2
7	0		1		2
8	0		1		2

IOR

ID FREQ

34410840*

3Update

Yes No

3

Figure 2-31 NCS channel list, update window

14.Press [Enter] to register input.

Note: The ID number range is 45-63 and the frequency code range is 8000-14000. Any ID or frequency entered which is out of those range will display "Input Error: NCS ID" (for in- valid ID) or "Input Error: Channel No." (For invalid fre- quency). Clear the error message by pressing the [Esc] key. Place the cursor at the invalid ID or frequency code. Then, press the [Enter] key and enter correct ID or frequency.

15. Press [Esc]. 2-17