Furuno RC-1500-1T manual System Initialization, System Settings, Two sets of DTEs installed

SYSTEM INITIALIZATION

This chapter provides the information necessary for initializing the FELCOM 12. Once the FELCOM 12 is initialized you need do no more than press a few keys to get fully automatic transmission and reception.

Inmarsat assigns each MES an Inmarsat Mobile Number (IMN). The

IMN has already been entered into the FELCOM 12.

System Settings

Two sets of DTEs installed

The communication unit provides two sets of connectors (DTE1, main; DTE2, 2nd) for connection of two DTEs. It is preset at the factory for connection with one DTE (main DTE). Main DTE is available to set the menu.

1. Press [F8] to select the Setup menu.

File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm

Setup

1.Distress Alert Setup

2.System Setup

3.Editor Setup

4.Terminal Setup

5.EGC Setup

6.Auto Mode Setup

7.E-Mail Setup

8.Directories

9.Configuration

Current State: IDLE	SYNC ( NCS )	97-08-04 01:50 (UTC)
	NCS: IOR	LOGOUT
DCE Ver **

Figure 2-1 Setup menu

Menu Items which cannot be set on 2nd DTE (Sub DTE )are shown in gray.

2-1