Outdoor Unit
Installation Location
WARNING
Install the outdoor unit in a location that can support the weight of the outdoor unit.
Insufficient durability may cause the outdoor unit to fall, which may result in injury.
Installation Manual
When an outdoor unit is installed in a location that is always exposed to strong winds like a coast or on the high stories of a building, one of the following is recommended.
•Install the unit so that its discharge faces the wall of the structure.
Keep a distance 19.7” (500 mm) or more between the unit and wall.
19.7" (500 mm)
CAUTION
Do not install the outdoor unit in a location that is subject to combustible gas leaks.
Accumulation of combustible gas around the outdoor unit may cause a fire.
Install the outdoor unit in a location that meets the following conditions.
•A
•A location that does not increase the operating noise or vibration of the outdoor unit
•A location that does not produce any drainage problems from discharged water
•Location with easy access to power.
Do not install the outdoor unit in the following location.
•A location with a saline atmosphere (coastal area) or one that is full of sulfide gas
•A location subject to oil, vapor, oily smoke, or corrosive gases
•A location in which organic solvent is used
•A location where
•A location in which the discharged air of the outdoor unit blows against the window of a neighboring house
•A location where the operating noise of the outdoor unit is transmitted
•When the outdoor unit is installed in an elevated position, be sure to secure its feet.
•A location in which drain water poses any problems.
•Install the unit so that the discharge is at a right angle relative to the wind direction.
Strong wind
Strong wind
•Use wind baffle. Produce those parts in the field.
•When outside temperature conditions are 23 °F
<Example>
Wind shield | Wind shield |
Wind shield
EN
– 8 – |