Outdoor Unit
3)Place unit on stand. Make sure it is level and fasten securely to the stand.
•As shown in the figure below, install the foundation and
•When installing the foundation for an outdoor unit with downward piping, consider the piping work.
GOOD
Mounting leg
Foundation 
GOOD
Bottom plate
of outdoor unit
Foundation
Support the bottom surface of the mounting leg that is in contact with and underneath the bottom plate of the outdoor unit.
Installation Manual
Drain nipple | Waterproof rubber cap |
(5pcs.) |
Drain nipple
Waterproof rubber cap
For Reference
If a heating operation is to be continuously performed for a long time under the condition that the outdoor temperature is 32 °F (0 °C) or lower, draining defrosted water may be difficult due to the bottom plate freezing, resulting in trouble with the cabinet or fan.
If only the end of the mounting leg is supported, it may deform. 
Foundation 
NO GOOD |
| Do not support | ||||
|
|
| the outdoor unit | |||
|
|
| only with the | |||
|
|
| mounting leg. | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•When water is to be drained through the drain hose, attach the following drain nipple and waterproof rubber cap, and use the drain hose (Inner diameter: 0.6” (16 mm)) sold on the market. Also seal the screws securely with silicone material, etc., to prevent water from leaking.
Some conditions may cause condensation or dripping of water.
•When collectively draining discharged water completely, use a drain pan.
– 11 – |
