Furuno RC-1500-1T manual Loading new roll paper

2.Unfasten screws A and push back B (for both right and left) shown below to remove the printer cover.

C Paper

Paper

Cover

Screw

A

B

3.Swing out the paper cover by 100° to 120° then lift it up from the right-hand side to remove it from the printer.

4.Referring to the previous figure, lift the paper bail C. As shown in the figure which follows, remove the roll paper stay D and then take out the roll paper.

D

Loading new roll paper

5.Insert the roll bar into the roll paper from the left side. Set the roll paper to the roll paper cradle.

	Roll Paper
Roll Bar	Type: A2 1PLT W
	Code No.: 000-134-903
		Select
	Type: T-214 white OKFIP
		either.
	Code No.: 000-119-433	(no carbon)
	Roll Paper
	Cradle

2 – 7