Furuno RC-1500-1T manual Setup

Function key [F6]: System menu

The System menu is mainly for use by technicians and includes diagnostic tests (self test). To change settings, select Change on the Setup line and operate arrow keys to select item and option. Press the [Enter] key to register selection and close the menu.

			System
	Setup				Lock		Change	Default
	Slave Delay			5		msec (0- 50 msec)
	BK Timing PreTone			10		msec (0-100 msec)
		PostTone		0		msec (0- 20 msec)
	Mute Timing PreBK			0		msec (0- 20 msec)
		PostBK		0		msec (0- 20 msec)
	Modem Output Level				0 dBm (-30 - +10 dBm)
	MIF Tune				OFF		O N
	Freeze				OFF		O N
	AGC				OFF		O N
	Emission				OFF		O N
	TX/RX MSG Save				OFF		O N
	Edit Before sending				OFF		O N
	Time System				OFF UTC SMT JST
	Time & Date			1997/3/16/10:00:00
	Display Mode				Normal Reverse
	Self Test
Figure 2-12 System menu
Setup				Locks, enables change or restores default
				system settings.
Slave Delay				Sets the length of the slave delay timing
				in the ARQ mode.

BK Timing PreTone	Sets the timing for the leading edge of
	the BK signal in the ARQ mode.
BK Timing PostTone	Sets the timing for the trailing edge of
	the BK signal in the ARQ mode.
Mute Timing PreBK	Sets the timing for the leading edge of
	the mute signal in the ARQ mode.
Mute Timing PostBK	Sets the timing for the trailing edge of
	the mute signal in the ARQ mode.
Modem Output Level Sets modem output level.
MIF Tune	Turn on to send antenna coupler tuning
	command. (Requires FURUNO Radio
	Equpment.)

2-10