Furuno RC-1500-1T manual Station List, Registering Stations

3.2 Station List

The station list provides abbreviated dialing with storage for up to 50 stations, one frequency pair (Rx and Tx) per station. For sta- tions which have more than one frequency pair, you might add a suffix to the station name to denote multiple frequency pairs. For example, station name FURUNO followed by -1, -2, -3, etc. for each frequency pair required.

Registering Stations

1.Press function key [F5] followed by the [1] key. The Station Entry screen appears.

Station Entry

Station List

Station Set Up

Create

Change

Station	:
ID Code	:
Mode	: ARQ FEC
CH/Table	: Channel ScanTable

Num/Table:

Figure 3-5 Station entry screen

2.On the right-hand side on the screen you should see Create and Change and Create should be underlined. If it is not, underline it by pressing [], [ ] and the [Enter] key.

3.The cursor is now on the Station line. Enter station name, us- ing up to 18 characters.

4.Press the [ ] key to go to the ID Code line. Enter station ID code.

5.Press the [ ] key to go to the Mode line. Select communica- tion mode among the following;

ARQ: Automatic Retransmission Request

FEC: Forward Error Correction

6.Press the [ ] key to go to the CH/Table line. Select ScanTable with [ ] or [ ] key to choose channel.

7.Press the [ ] key to go to the Num/Table line.

3-3