Furuno RC-1500-1T manual Editor menu setup, 5 Editor setup menu

When the recipient receives a message with both addressee code and password, he must enter the password to view contents of the mes- sage.

Editor menu setup

The Editor menu sets the parameters of the text editor.

1.Press [F8] to display the Setup menu.

2.Press [3] to display the Editor Setup menu.

Figure 3-5 Editor setup menu

3.Figure 3-5 shows the default editor setup settings. To change set- tings, select item with arrow keys, press [Enter] to open selection window, and select settings with arrow keys. After selecting set- tings, press [Enter].

Text Mode:	Select “Telex” or “ASCII”.
Edit Mode:	Select “Insert” (insert character at cursor location)
	or “Overwrite” (write over character at cursor lo-
	cation).
Word Wrap:	Turns on/off hyphenation at end of line.
Line No.:	Turns line number display on or off.
Tab Width:	Sets horizontal tab width; 2, 4 or 8 tabs per line.
Column Width:	Select Telex (69 Fixed) or ASCII (40 to 80).
Cursor Type:	Selects cursor appearance, either (Block) or un-
	derline.

3-3